| |
| Contact Velcon: |
| Phone: |
719.531.5855
800.531.0180 |
| Fax: |
| 719.531.5690 |
| Mailing Address: |
Velcon Filters, LLC
1210 Garden of the Gods Road
Colorado Springs, CO 80907 |
| Email: |
| vfsales@velcon.com |
|
|
|
| |
|
|
| |
Horizontal Filter/Separators |
|
 |
 |
 |
| |
HV and HVS Series
API/EI 1581 5th Edition Qualified
Compact Side and End Opening Horizontal
Filter/Separator Vessels for Mobile Fueling Equipment
Designed Specifically for
Hydrant Carts and Refuelers
FEATURES
- Reduced Weight is vital in the manufacture of refuelers and hydrant carts. Velcon Filter/Separators drastically reduce the weight of the vessel.
- Reduced Size is another important factor in designing refuelers and hydrant carts. Velcon Filter/Separators reduce the size of the vessel by up to 50%.
- Easier Maintenance. One piece cartridge design provides faster changeout and fewer potential gasket leaks than stacked cartridges.
- Industry Qualified. Velcon HV and HVS Series Horizontal Filters/Separators are fully qualified to API/EI 1581, Fifth Edition. These units incorporate one piece threaded base coalescer elements for easy, reliable installation and reusable one piece Teflon® coated screen separators.
SPECIFICATIONS
- 150 psi ASME Code Construction
- Victaulic Connections (Flanges Optional)
- Swing Bolted Closure
- Buna-N O-Ring Cover Seal
- Spider Assembly to stabilize cartridges
- MIL-PRF-4556 Epoxy Coated Interior, Primed Exterior
- Fittings for Pressure Relief Valve, Air Vent, and Pressure Gauge
- Sump is covered with plywood when shipped. Bolted steel cover is available as an option
HVS Series
Side Opening Vessels
A side opening vessel allows access to the cartridges from the main shell of the vessel. The cartridges are mounted in an “end opposed” configuration, with coalescers mounted on one end of the vessels and separators mounted on the other. These vessels are often used on refueling vehicles that require special orientation of the vessel for servicing the cartridges.
|

|

Photo Courtesy of Rampmaster
|
Velcon has qualified several side opening vessel configurations, shown below, for API/EI 1581 5th Edition, as follows: Category “C” vessels are for use in commercial Jet-A or Jet-A1 fuel. Type “S-LW” vessels can be used for mobile applications where minimal amounts of water can be expected in the jet fuel. |
Vessel Model |
|
Coalescer |
Separator |
Wt w/Skid (lbs) |
Vol
(US Gal) |
Qty. |
Model |
Qty. |
Model |
| HVS2222M |
380 |
7 |
I-622C5TB |
3 |
SO-609V5 |
1070 |
85 |
| HVS2228M |
510 |
7 |
I-628C5TB |
4 |
SO-609V5 |
1100 |
95 |
| HVS2628M |
635 |
9 |
I-628C5TB |
5 |
SO-609V5 |
1340 |
132 |
| HVS2828M |
730 |
10 |
I-628C5TB |
6 |
SO-609V5 |
1580 |
150 |
| HVS3133M |
1020 |
12 |
I-633C5TB |
8 |
SO-609V5 |
2000 |
195 |
HV Series
End Opening Vessels
The coalescer and separator cartridges on end opening vessels are mounted on the same end. These vessels are normally used on refueling vehicles.
Velcon has qualified several end opening vessels configurations, shown below, for API/EI 1581 5th Edition, as follows: Category “C” vessels are for use in commercial Jet-A or Jet-A1 fuel. Category “M” vessels are for use in military JP-8 or JP-5 fuel. Testing to Category “M” qualifies for both Category “M” and Category “C”.
|
 |
 |
Type “S-LW” vessels are used for mobile applications where minimal amounts of water can be expected in the jet fuel. Type “S” filter/separators are used locations where significant levels of both dirt and water can be expected. |
Vessel Model |
Cat. |
Type |
Flow Rate (GPM) |
Cover Style |
Coalescer |
Separator |
Wt w/Skid (lbs) |
Vol
(US Gal) |
Qty. |
Model |
Qty. |
Model |
| HV1414M |
C |
S-LW |
70 |
Flat |
2 |
I-614C5TB |
1 |
SO-417V5 |
350 |
17 |
M |
S |
55 |
I-614MMTB |
| HV1416M |
C |
S-LW |
90 |
Flat |
2 |
I-616C5TB |
1 |
SO-318V5 |
400 |
18 |
M |
S |
70 |
I-616MMTB |
| HV1422M |
C |
S-LW |
125 |
Flat |
2 |
I-622C5TB |
1 |
SO-324V5 |
420 |
20 |
M |
S |
100 |
I-622MMTB |
| HV1622M |
C |
S-LW |
190 |
Flat |
3 |
I-622C5TB |
1 |
SO-424V5 |
440 |
32 |
M |
S |
150 |
I-622MMTB |
| HV1633M |
C |
S-LW |
300 |
Flat |
3 |
I-633C5TB |
1 |
SO-436V5 |
450 |
42 |
M |
S |
240 |
I-633MMTB |
| HV2233M |
C |
S-LW |
425 |
Flat |
4 |
I-633C5TB |
2 |
SO-424V |
800 |
69 |
M |
S |
305 |
I-633MMTB |
SO-424V5 |
| HV2238M |
C |
S-LW |
495 |
Flat |
4 |
I-638C5TB |
2 |
SO-430V |
835 |
77 |
M |
S |
365 |
I-638MMTB |
SO-430V5 |
| HV2244M |
C |
S-LW |
580 |
Flat |
4 |
I-644C5TB |
2 |
SO-436V |
870 |
87 |
M |
S |
425 |
I-644MMTB |
SO-436V5 |
| HV2456M |
C |
S-LW |
745 |
Flat |
4 |
I-656C5TB |
2 |
SO-636V |
1255 |
124 |
M |
S |
555 |
I-656MMTB |
SO-636V5 |
| HV2828M |
C |
S-LW |
615 |
Dome |
7 |
I-628C5TB |
2 |
SO-624V |
1210 |
120 |
M |
S |
405 |
I-628MMTB |
SO-624V5 |
| HV2833M |
C |
S-LW |
740 |
Dome |
7 |
I-633C5TB |
2 |
SO-636V |
1255 |
135 |
M |
S |
550 |
I-633MMTB |
SO-636V5 |
| HV2838M |
C |
S-LW |
865 |
Dome |
7 |
I-638C5TB |
2 |
SO-636V |
1300 |
150 |
M |
S |
615 |
I-638MMTB |
SO-636V5 |
| HV2844M |
C |
S-LW |
1015 |
Dome |
7 |
I-644C5TB |
2 |
SO-640V |
1350 |
166 |
M |
S |
690 |
I-644MMTB |
SO-640V5 |
| HV2856M |
C |
S-LW |
1310 |
Dome |
7 |
I-656C5TB |
2 |
SO-648V |
1460 |
198 |
M |
S |
830 |
I-656MMTB |
SO-648V5 |
Please contact Velcon Filters, LLC for additional possible vessel configurations.
Horizontal Filter/Separators Data Sheet #1939 |
|
| |
|
|
|