Horizontal Filter/Separators
HV-xxxx225 Series

Horizontal Filter/Separator Vessels

for Fixed Installations at Military Facilities

Meeting USAF Filter/Separator

Specifications Section 15880

EASIER CARTRIDGE CHANGE

The horizontal filter/separator design provides more convenient access to the cartridges than the vertical design.

EFFLUENT CLEANLINESS

A horizontal filter/separator must be drained to change the elements. This prevents the possibility of getting dirt in the effluent that can occur if the operator does not fully drain a vertical vessel when changing elements. The separator mounting holes on a horizontal vessel are in a vertical plane at the top of the vessel so it is nearly impossible to get dirt in the effluent when cartridges are being changed.

TESTED AND APPROVED* VESSELS

Velcon HV-xxxx225 Series Horizontal Filter/Separators are qualified to USAF Specification 15880. This speci­fi­cation is similar to EI 1581, Fifth Edition, Category M. These vessels incorporate one piece threaded base coalescer elements for easy, reliable installation and reusable one piece Teflon® coated screen separators.

* Approval letters are available upon request.

SPECIFICATIONS

• 225 psi ASME Code Construction
  
• RF Flanged Connections
  
• Swing Bolted Closure
  
• Buna-N O-Ring Cover Seal
  
• Mil-PRF-4556 Epoxy Coated Interior, Primed Exterior

STANDARD ACCESSORIES

In compliance with USAF Specification 15880, the following accessories are included for safe, effective operation

• Automatic Air Vent with Check Valve
  
• Pressure Relief Valve**
  
• Direct Reading Differential Pressure Gauge
  
• Sampling Probes with Ball Valves
  
• Stainless Steel Ball Valve Manual Drain
  
• Sight Gauge with Ball Checks and Colored Density Sensitive Ball
  
• ASME Code Stamp
  
• API Nameplate

** Does not meet Mil-V-11201

OPTIONAL ACCESSORIES

• Interface Control
  
• Water Slug Control Valve

These optional accessories may be supplied directly by the control valve manufacturer, depending on purchase specifications.

FLOW RATES AND CARTRIDGES

Note: ⁽¹⁾ For Jet A, Jet A-1, Jet B, JP-4, JP-5, JP-8

Horizontal Filter/Separators HV-225 Series - Data Sheet #1750