Disposable Cartridges

High efficiency, long-life cartridges for fuels, fluids, and oils

Velcon DC Series Disposable Cartridges

CK-1480 kit with

DC Series cartridge

and cover plate

 

Disposable Cartridges -Data Sheet #2002

BENEFITS

LOWER COSTS

Savings are realized by reducing the volume of material you send to hazardous waste disposal facilities and by minimizing the time you spend on regulatory compliance record keeping, reporting and tracking.

FEATURES

APPLICATIONS

Velcon pleated paper media cartridges are suitable for a broad range of polar and non-polar fluids. Recommended for applications where the contaminant is granular (non-colloidal), allowing maximum utilization of the high surface area.

Suitable for:

CARTRIDGES

All cartridges are 6” outside diameter and are offered in four lengths: 14”, 29”, 44” and 58”.

SPECIFICATIONS

Interchangeable with Facet – to use the Velcon Disposable Cartridges, DC-Series, you must first have an Installation Kit installed.

FILTER CROSS-REFERENCE TABLE

 

Velcon P/N
Facet P/N
Length (inches)
Micron Rating

Velcon Kit

P/N

Replaces Facet Kit
DC-614PLF1
CIF1
14
1
CK-1479
CIF1KIT (14" Kit)
DC-629PLF1
CIF1X2
29
1
CK-1480
CIF2KIT (29" Kit)
DC-644PLF1
CIF1X3
44
1
CK-1481
CIF3KIT (44" Kit)
DC-658PLF1
CIF1X4
58
1
CK-1482

CIF4KIT (58" KIT)

DC-614PLF5
CIF5
14
5
CK-1479
CIF1KIT (14" Kit)
DC-629PLF5
CIF5X2
29
5
CK-1480
CIF2KIT (29" Kit)
DC-644PLF5
CIF5X3
44
5
CK-1481
CIF3KIT (44" Kit)
DC-658PLF5
CIF5X4
58
5
CK-1482

CIF4KIT (58" KIT)

 

PERMANENT FILTER CORE KITS

CK-1479, CK-1480, CK-1481, & CK-1482

Velcon’s permanent filter core kits mount easily into filter vessels to provide support for DC Series disposable cartridges. The core is a simple one-piece design that can be installed directly into the vessel, unlike the complicated multi-piece plastic designs. Velcon’s permanent cores have high quality, all aluminum construction and achieve 175 psi collapse strength. The one-piece design and smooth outer surface allow for easy installation and removal of the DC Series cartridges. Kits are available in 14”, 29”, 44” and 58” lengths.


Each kit includes the tube assembly, nuts and washers. Filters and additional hardware should be ordered separately.


NOTE: The Velcon Permanent Support Tube Kits are designed for use only with standard 3 1⁄2” filter mounting adapters and appropriate length tie rods. The kit will not work with threaded base adapters.


The Velcon Permanent Support Tube Kits are designed for use with either the Velcon “DC” disposable cartridges or Facet CIF Series cartridges of appropriate length.

The Velcon Permanent Support Tube Kits are designed to replace the Facet CIF Series Center Tube Kits.