- Inside-to-Out Flow Filter Cartridges
- Designed to replace coalescers in filter/separator vessels
- Available in fiberglass or pleated paper, depending on application
View Datasheet PDF (121 KB)
Specialized Filters for Use in Filter/Separator Vessels
The FI Series of Inside-to-Out flow filter cartridges are specially designed to replace the coalescer elements in filter-separator vessels. The FI filter cartridges are excellent choices to reduce filtration costs when flushing new systems, or when a filter/separator vessel is used to remove particulate matter only and not water. (Many surplus F/S vessels in the field have been used as pre-filter/micronic vessels.)
The FG suffix, all fiberglass filter elements (e.g., Fl-644FG5), are intended for colloidal or slimy type matter; whereas the PL suffix, pleated paper filter elements (e.g., FI-644PLF5), are intended for normal particulate matter.
- 98% filtration efficiency with micron ratings from 1/2 and higher
- Thermoset Adhesive Material – Durable endcap-tomedia bond prevents internal bypassing
- Buna-N Gaskets – The best general gasket material available, assures positive seals
- Coated Steel Components – Resist corrosion from most industrial fluid
- 75 psi Burst Strength – Heavy gauge carbon steel endcaps and outer reinforcing give safety margin
against pressure surge
APPLICATIONS
- All Hydrocarbon Fuels
- Glycols
- Water Emulsion Coolants
- Toluol
- Insulating Oils
- Synthetic Oils
- Cutting Oils
- Degreasing Fluids
- Naphtha
- Ethyl Alcohol
- Lube Oils
- Hydraulic Oils
CARTRIDGE INFORMATION
The following table lists the sizes and features of the available Fl Series cartridges. More will be added. Your local Velcon Representative can provide more complete information.
SPECIFICATIONS
- 75 psi Burst Strength
- 98% Nominal Filtration Efficiency
- 5 - 9 Operating pH range
- 160°F Maximum operating temperature
- Micron Ratings from 0.5
- Inside-to-Out Flow
- Change out at 15 psid
|
