| View Datasheet 1858 - PDF (144kb)
Designed for superior performance in VF-61 & VF-609 Housings, Facet's VFCS-21 & VFCS-22 Filter/Separator Vessels & Racor's FBO-10 & FBO-14 Housings
FEATURES
- Can be used with pre-mixed fuel containing anti-icing additive
- One piece replacement combination coalescer and separator cartridge
- Laboratory tested to 0.2% water in incoming fuel, less-than 10 ppm in effluent
- Teflon® Coated Screen Separator
- Reliable radial sump seal design
- Easy installation
- Nominal 1/2 micron particle efficiency for Jet Fuel and-Avgas;
5 micron for Diesel Fuel
- Minimum 75 psid collapse strength
- Flow direction – outside to inside
- Operating temperatures up to 240°F (115°C)
- 5 - 9 operating pH range
The OS Series combination coalescer/separator cartridges filter dirt and remove water from aviation and diesel fuels. They are designed to fit into Velcon's VF-61 and VF-609 housings, Facet'S VFCS-21 and VFCS-22 filter/separator housings, and Racor's FBO-10 and FBO-14 housings. Performance is improved due to Teflon® coated screen separators and reliable radial sump seals.
DESCRIPTION
Flow is from outside to inside through the cartridge. Coalesced water is repelled by the separator and drops to the sump for daily draining. Clean, dry fuel exits the cartridge through the nozzle at the top.
CARTRIDGE SELECTION TABLE
Replace the cartridge when the differential pressure exceeds 15 psi or after 1 year of service, whichever
occurs first.
*Because of the limited sump space in these vessels, IT IS IMPERATIVE to drain the sump at EVERY FUELING. It is also important to recognize that these OS cartridges by themselves do not provide a water defense system. One water defense option is to use the Water Detection Probe, Velcon part number 125-Q.
|
