- Corrugated pleated media with large surface area for filtration of granular contaminants.
- Also available in screw-base design
Pleated Media Filter Cartridges (124 KB)
Pleated Media API/EI 1590 Qualified Filter Cartridges (363 KB)
NEW! Dual Media Cartridges - Two-layer filtraion through a single filter cartridge. CLICK HERE to view PDF data sheet (118 KB)
High Efficiency, Long Life Cartridges for Industrial Fluids
- Large Surface Area – Allows high flow rate with low initial pressure drop and maximum
contaminant holding capacity.
- Resin Impregnated Media – Maintains strength, resists effects of water and heat.
- 75 psi Collapse Strength – Heavy gauge carbon steel endcaps and center tube give safety margin
against pressure surges.
- Coated Steel Components – Resist corrosion from most industrial fluids.
- Corrugated Media – Prevents pleat pinch-off, assuring all filtration media is utilized.
- Buna-N Gaskets – The best general gasket material available assures positive seal in most fluids.
- Thermoset Bonding Material – Durable endcap-to-media bond prevents internal bypassing
- Threaded base filter cartridges – Available for easier installation.
APPLICATIONS
Velcon Pleated Media Cartridges are suitable for a broad range of polar and non-polar fluids. Recommended for applications where the contaminant is granular (non-colloidal), allowing maximum utilization of the high surface area.
Suitable for:
- All Hydrocarbon Fuels
- Cutting Oils
- Glycols
- Degreasing Fluids
- Water Emulsion Coolants
- Naphtha
- Lube Oils
- Ethyl Alcohol
- Insulating Oils
- Toluol
- Synthetic Oils
- Hydraulic Oils
- DieselFuel
- Biodiesel Fuel
SPECIFICATIONS
- Recommended changeout differential pressure - 25 psid
- 75 psi Collapse strength
- Micron ratings from 1/2 to 75
- 98%+ Nominal filtration efficiency
- 5 - 9 Operating pH range
- 250°F Maximum operating temperature
- Multi-pass (Beta Ratio) data available on request
- For information about Flow Ratings with various viscosity fluids, refer to Form #1532
CARTRIDGE INFORMATION
The following table lists a few of the broad range of available Velcon cartridges and some of their common
interchanges. Your local Velcon Representative can provide more complete information.
| Dimensions |
Model |
Nominal Micron Rating |
Protective Outer Wrap |
4” x 12¼”
x 1¾” ID |
FO-412PL2 |
2 |
No |
| FO-412PL5 |
5 |
No |
4” x 18”
x 1¾” ID |
FO-418PL5 |
5 |
No |
| FO-418PL15 |
15 |
No |
For VF-61 Housing |
FO-512PL1/2 |
0.5 |
No |
| FO-512PL05 |
5 |
No |
| FO-512PL25 |
25 |
No |
6” x 14½”
x 3½” ID |
FO-614PLF1/2 |
0.5 |
No |
| FO-614PLF1 |
1 |
No |
| FO-614PLF2 |
2 |
No |
| FO-614PLF5 |
5 |
No |
| FO-614PLF5M |
5 |
Yes |
| FO-614PLF10 |
10 |
No |
| FO-614PLF15 |
15 |
No |
| FO-614PLF15M |
15 |
Yes |
| FO-614PLF25 |
25 |
No |
| FO-614PLF25M |
25 |
Yes |
| FO-614PLF75 |
75 |
No |
6” x 29”
x 3½” ID |
FO-629PLF1/4 |
0.25 |
Yes |
| FO-629PLF1/2 |
0.5 |
Yes |
| FO-629PLF1 |
1 |
Yes |
| FO-629PLF2 |
2 |
Yes |
| FO-629PLF5 |
5 |
Yes |
| FO-629PLF10 |
10 |
Yes |
| FO-629PLF20 |
20 |
Yes |
| FO-629PLF25 |
25 |
Yes |
6” x 29” Threaded Base |
FO-629PLF1/2TB |
0.5 |
Yes |
| FO-629PLF1TB |
1 |
Yes |
| FO-629PLF2TB |
2 |
Yes |
| FO-629PLF5TB |
5 |
Yes |
| FO-629PLF25TB |
25 |
Yes |
6” x 44”
x 3½” ID |
FO-644PLF1/2 |
0.5 |
No |
| FO-644PLF1M |
1 |
Yes |
| FO-644PLF2M |
2 |
Yes |
| FO-644PLF5M |
5 |
Yes |
| FO-644PLF10M |
10 |
Yes |
| FO-644PLF15M |
15 |
Yes |
| FO-644PLF25M |
25 |
Yes |
6” x 44” Threaded Base |
FO-644PLF1/4TB
|
0.25 |
Yes |
| FO-644PLF1/2TB |
0.5 |
Yes |
| FO-644PLF1TB |
1 |
Yes |
| FO-644PLF2TB |
2 |
Yes |
FO-644PLF5TB
|
5 |
Yes |
| FO-644PLF10TB |
10 |
Yes |
FO-644PLF25TB
|
25 |
Yes |
6” x 56”
x 3½” ID |
FO-656PLF1M |
1 |
Yes |
6” x 56” Threaded Base |
FO-656PLF1/2TB |
0.5 |
Yes |
| FO-656PLF1TB |
1 |
Yes |
| FO-656PLF2TB |
2 |
Yes |
| FO-656PLF5TB |
5 |
Yes |
| FO-656PLF25TB |
25 |
Yes |
6¼” x 18”
x 29/16” ID |
FO-718PLP3
|
0.3 |
No |
| FO-718PL1/2 |
0.5 |
No |
| FO-718PL01 |
1 |
Yes |
| FO-718PL02 |
2 |
Yes |
| FO-718PL05 |
5 |
Yes |
| FO-718PL10 |
10 |
Yes |
| FO-718PL15 |
15 |
Yes |
| FO-718PL25 |
25 |
Yes |
| FO-718PL50 |
50 |
Yes |
6¼” x 36”
x 29/16” ID |
FO-736PLP3 |
0.3 |
No |
| FO-736PL1/2 |
0.5 |
No |
| FO-736PL05 |
5 |
Yes |
| FO-736PL15 |
15 |
Yes |
8” x 221/8”
x 2” ID |
FO-822PLP3 |
0.3 |
No |
| FO-822PL1/2 |
0.5 |
No |
| FO-822PL05 |
5 |
No |
8” x 29½”
x 2” ID |
FO-829PL05 |
5 |
No |
Dual Media Cartridge Information
| Dimensions |
Model Number |
Nominal Micron Efficiency |
Upstream |
Downstream |
6” OD x 29” OAL x 3-1/2” ID |
FO-629PLF5/1M |
5 |
1 |
| FO-629PLF15/2M |
15 |
2 |
| FO-629PLF25/5M |
25 |
5 |
6” OD x 44” OAL x 3-1/2” ID |
FO-644PLF5/1M |
5 |
1 |
| FO-644PLF15/2M |
15 |
2 |
| FO-644PLF25/5M |
25 |
5 |
6” OD x 56” OAL x 3-1/2” ID |
FO-656PLF5/1M |
5 |
1 |
| FO-656PLF15/2M |
15 |
2 |
| FO-656PLF25/5M |
25 |
5 |
|
