Lightweight Portable Handcart Filter-Pump
Removes Water and Dirt from Oils and Fuels
5 GPM Flow Rate
No Tools Required to Change Cartridges
The MP5E is a complete filtration package on wheels. All you have to do is install the filter cartridge, plug it in, and watch it meet your toughest filtration requirements.
Designed for industrial applications, the MP5E uses a large filter cartridge with up to 4500 square inches of filter media. This improves filtration efficiency and capacity, reduces change-out frequency and gives the best long term operating costs.
More than 26 types of filter cartridges are available to meet your specific filtration requirements.
The MP5E Portable Filter can be used for:
Transfer: Remove dirt and water while pumping oils or fuel from one place to another.
Preventive Maintenance: Routine filtering of oil at the machine reservoir extends the life of machine components and the oil itself.
Reclamation: Put spilled oil into a drum, filter it to remove dirt and water, and you can reuse the oil instead of throwing it away.
The MP5E Portable Filter effectively processes:
- Insulating Oil Quench Oil
- Hydraulic Oil Gasoline
- Gear Oil Cutting Oil
- Lube Oil Diesel Fuel
- Transformer Oil Kerosene
- Biodiesel Fuel
OPTIONS & ORDERING INFORMATION
Specify model numbers as shown below:
||115 vac, 1 phase, 60 Hz (basic unit)
||115 vac, 1 phase, 60 Hz, explosion proof*
||230 vac, 1 phase, 60 Hz
||230 vac, 1 phase, 60 Hz, explosion proof*
||230 vac, 1 phase, 50 Hz
||230 vac, 1 phase, 50 Hz, explosion proof*
||Flow Control Bypass – Allows manual adjustment of flow rate; controls pump cavitation
||Filter Bypass – Transfer oil without filtration
||Delta P Gauge – Direct reading 0 - 50 psid differential pressure gauge
||Digital Flowmeter – Direct reading, displays flow rate, total flow volume, total resettable batch flow volume
||Effluent Sample Tap - with 1/4 turn ball valve
||High Pressure Shut-off Switch, adjustable, with reset button
||4-Way Inlet Valve - reverses direction of flow through hoses
*Note: Explosion proof units shipped without power cord, switch, or plug
For stationary base mounted unit, substitute “S” in model number for “P”. Example: MS5E-1 = stationary base mtd 5 gpm filter pump, 115 vac, 1 ph, 60 Hz
The MP5E portable filter accepts all Velcon standard 618/718 size cartridges. Cartridges are available for removal of free water, dirt, and acids. Contact your local Velcon representative for a complete listing of available cartridges and their applications.
- 6 cartridges
- 1 G-1016 Buna-N lid gasket
Note: If Viton-A lid gaskets are desired, order 2 G-1016A
- 5 gpm flow rate
- Epoxy coated vessel interior and exterior
- Band clamp vessel closure
- 10 inch semipneumatic wheels
- Totally enclosed fan cooled (TEFC) motor 1/2 hp, 115V, 1 phase, 60 Hz, 10 amps
- Self priming positive displacement pump with built-in pressure relief valve
- Pressure gauge
- 3 wire power cord 10 feet long with 3 prong plug
- 9 feet inlet and discharge hose, 3/4” I.D.
- 3/4” NPT male fittings on hose ends
- Strainer mounted on inlet line
- Weight: 106 Ibs. Shipping weight: 130 Ibs.
- Height: 52” Length: 18” Width: 22”