| |
Lightweight Portable Handcart Filter Pump
Removes Water and Dirt From Gear Oil
FEATURES
- Removes dirt and water from gear oil and other high viscosity oils
- Filters oils with viscosities up to 12,000 SUS (2,600 cSt.) – equivalent to an ISO VG 680 oil
(SAE 140 wt gear oil) at 70°F
- Components specifically selected for use with high viscosity oils
- large, reinforced suction hoses
- 1 gpm flow rate
- oversized motor
- Can also be used with lighter hydraulic, lube and insulating oils
SPECIFICATIONS
- 1 gpm flow rate
- Epoxy coated vessel interior and exterior
- Band clamp vessel closure
- 10-inch semipneumatic wheels
- Totally enclosed fan-cooled (TEFC) motor – 1/2 hp, 115 V, 1-phase, 60 Hz, 10 amps
- Self-priming positive displacement pump with built-in pressure relief valve
- Pressure gauge
- 3-wire power cord, 10 ft. long with 3-prong plug
- 1” Y strainer mounted on pump
- 9-ft. suction hose, 1” wire reinforced with 1” NPT male fitting on end
- 9-ft. discharge hose, 3/4” 2 ply with 3/4” NPT male fitting on end
- Weight: 106 lbs.
- Shipping Weight: 130 lbs.
- Height: 52”, Length: 18”, Width: 22”
|
 |
 |
CARTRIDGE SELECTION
For 12,000 SUS
(ISO VG 680/SAE 140 wt gear oil at 70°F)
and lower
Dirt and Water Removal: AD-71825
Dirt Removal Only: FO-718PL05 or PL15
For 5,500 SUS
(ISO VG 320/SAE 90 wt gear oil at 70°F)
and lower
Above cartridges plus:
Dirt and Water Removal: AC-71805
Dirt Removal Only: FO-718PL02
For 2,000 SUS
(ISO VG 150/SAE 40 wt automotive oil at 70°F)
and lower
Above cartridges plus:
Dirt and Water Removal: AC-7181/2 and 01
Dirt Removal Only: FO-718PL1/2 and 01 |
OPTIONS & ORDERING INFORMATION
Specify model numbers as shown below:
| MP1EG-1 |
115 vac, 1-phase, 60 Hz (basic unit) |
| MP1EGXP-1 |
115 vac, 1-phase, 60 Hz, explosion proof* |
| MP1EG-2 |
230 vac, 1-phase, 60 Hz |
| MP1EGXP-2 |
230 vac, 1-phase, 60 Hz, explosion proof* |
| MP1EG-7 |
230 vac, 1-phase, 50 Hz |
*Note: Explosion proof units shipped without power cord, switch, or plug
For stationary base mounted unit, substitute “S” in model number for “P”.
Example: MS1EG-1 = stationary base mtd 1 gpm filter pump, 115 vac, 1-ph, 60 Hz
703Y004 Delta P Gauge – Direct reading 0 - 50 psid differential pressure gauge
722Y006 Digital Flowmeter – Direct reading, displays flow rate, total flow volume, total resettable batch flow volume
550Y020 Flow Control Bypass – Allows manual ad- justment of flow rate; controls pump cavitation
552Y030 Filter Bypass – Transfer oil without filtration
Portable Oil Filter MP1EG - Data Sheet #1721
|
|