5 GPM Turbine Oil Coalescing System
TOC5-1

HEAVY DUTY PORTABLE SYSTEM

• Remove free water and dirt from turbine lube oil

• Two-stage filter/coalescer system

• Rugged welded steel construction

• Large pneumatic wheels for easy mobility

PERFORMANCE

• Restore oil to an ISO cleanliness of 14/11 or better
  
• Continuously remove free water down to 150 ppm or better
  
• Prevent system sludging and premature degradation

SIMPLICITY

• Complete, self-contained unit
  
• Compact, one-switch operation

RELIABILITY

• ASME designed housing assures safe, leak-free service
  
• Heavy duty gear pump offers years of maintenance free operation
  
• Uses latest high efficiency filter/coalescer and separator technology
  
• System is factory hydro-tested and operated before shipping

SPECIFICATIONS

• 1/2 hp, 120 vac, 1-ph, 60 Hz, 1750 rpm totally enclosed fan-cooled motor
  
• 5 gpm positive displacement gear pump with built-in pressure relief bypass
  
• Pressure housing built in accordance with ASME Sec. VIII for maximum operating pressure of 100 psi
  
• 12” pneumatic tires
  
• 10 ft. long suction and discharge hoses, 3/4” diameter
  
• 1/4-turn ball valve at housing drain
  
• Inlet pressure gauge indicates when cartridge must be changed
  
• 10 ft. 3-wire power cord with on-off switch
  
• Valved sight glass
  
• Polyester polyurethane powder coat paint
  
• Shipping weight: 425 pounds
  
• Height: 48”, Width: 24”, Depth: 32”

ORDERING INFORMATION

Specify model number as shown below. Units are shipped with one set of cartridges installed.
TOC5-1 120 v, 1-ph, 60 Hz
Contact factory for alternate power options.

OPTIONS AND ACCESSORIES

RECOMMENDED SPARES

Turbine Oil Coalescing System TOC5-1 - Data Sheet #1857