| |
Superdri® Handcart Filter System 
- Remove dissolved water from transformer oil without heat and vacuum
- 5 GPM Flow Rate
FEATURES
- Flow control bypass
- Filter bypass
- Digital flowmeter/totalizer
- Sample taps
- Portable handcart mounted
DESCRIPTION
The MXP5E comes with all the features needed for proper use of Velcon Superdri® Cartridges for dissolved water removal from transformer oil. Parallel flow through the two filter housings assures the proper flow rate through each SD-718 Superdri® cartridge. The unit is also valved so that series flow is possible for non-dissolved water oil handling applications, such as removal of dirt and free water. Use FO filter cartridges in the first housing to remove dirt particles. An Aquacon® cartridge in the second stage removes free water.
The flowmeter/totalizer feature allows the user to calculate the approximate lifetime of the Superdri® cartridges without an on-line moisture monitor. For dissolved water removal from transformer oil, the MXP5E is an economical alternative to more costly heat and
vacuum systems.
APPLICATIONS
The MXP5E-1 Portable Filter can be used for:
- Network transformer filling
- Drying wet LTC Compartments
- Vacuum-type LTC’s
- Drum transferring operations
- Dissolved water removal capability for critical
- oil quality requirements
SPECIFICATIONS
- 5 gpm flow rate
- Epoxy coated vessels
- Band clamp vessel closures
- Max. operating pressure 100 psi
- 10” semi-pneumatic wheels
- Flow control bypass
- Filter bypass
- Flow meter and totalizer
- Self priming positive displacement pump with built in pressure relief valve
- Static pressure gauge, manual air vent, and manual drain valve on each housing
- ½ hp, 115V, 1-phase, 60 htz., 10 amp TEFC motor*
- 10 ft x 3 wire power cord
- 10 ft inlet and outlet hose, ¾” ID w/ ¾” male npt fittings
- Suction y-strainer
- Weight 155 lbs., shipping weight 200 lbs.
- Height: 52”, Width: 24”, Depth: 22”
OPTIONS & ORDERING INFORMATION
Specify model numbers as shown below:
| MXP5E-1 |
115 vac, 1 phase, 60 Hz (basic unit) |
| MXP5EXP-1 |
115 vac, 1 phase, 60 Hz, explosion proof* |
| MXP5E-2 |
230 vac, 1 phase, 60 Hz |
| MXP5EXP-2 |
230 vac, 1 phase, 60 Hz, explosion proof* |
| MXP5E-7 |
230 vac, 1 phase, 50 Hz |
| MXP5EXP-7 |
230 vac, 1 phase, 50 Hz, explosion proof* |
| MXP5E-10 |
Air motor |
| 746Y012 |
Moisture Sensor |
*Note: Explosion proof units shipped without power cord, switch, or plug
For stationary base mounted unit, substitute “S” in model number for “P”.
Example: MXS5E-1 = stationary base mtd 5 gpm filter pump, 115 vac, 1 ph, 60 Hz
CARTRIDGE SELECTION
The MXP5E portable filter accepts all Velcon standard 618/718 size cartridges. Cartridges are available for removal of free water, dirt, and acids. Contact your local Velcon representative for a complete listing of available cartridges and their applications.
Parallel Operation: Use ( 2) SD-718
Series Flow: Use (1) FO-718PL1/2 and (1) AC-71801
RECOMMENDED SPARES
- 6 cartridges
- 1 G-1016 Buna-N lid gasket
Note: If Viton-A lid gaskets are desired, order 2 G-1016A
MXP5E-1 Portable Oil Filter Data Sheet #1996 |
|